TO ORDER OR FOR MORE INFO CALL (205) 823-7278 OR EMAIL gofast@paeco.com

                                                   Street rollbars:

    Our rollbars are the best available anywhere. The street bars consist of a main mandrel-bent hoop and two diagonal rear braces, plus all of the mounting plates and bolts. The top will go up and down over the street rollbars. Please note that our street bars are NOT intended for racing or high speed driving of any type. They are, as the name implies, only for street use.

                                                                Slalom rollbars:                                                                          Slalom Bar shown

    The slalom bars have extra height to meet the old SCCA helmet clearance requirements, are made from slightly larger tubing,  and have an extra diagonal slanting brace across the main hoop. You may specify slalom bars without the extra height to allow the top to go up and down for street use if you wish. Many people use these bars for track days, autocross,  and solo events. They will NOT meet the current SCCA full race standards.

    For those who want the maximum in racing safety, we offer SCCA-approved roll cages that meet the latest SCCA racing specs. These are furnished in two ways:

                             (1) COMPLETE ROLL CAGE    OR    (2) PARTIAL KIT

    The Complete Roll Cage consists of a PAECO slalom roll bar and the necessary tubing and hardware to weld to it to make a complete roll cage. The Partial Kit contains just the tubing and hardware and will weld to your present slalom bar to make a cage. Roll cages are sold on a special-order basis only. If your car is not listed in the slalom bar list and you presently have a rollbar that you want to convert to a cage, we can still furnish you with a Partial Kit. Just tell us the main hoop dimensions and the rear brace lengths of the bar.  SCCA rollbar specs change constantly and we do stay in touch with the tech people in Denver about them. Your PAECO roll cage WILL MEET the current SCCA specs 

    PAECO rollbar padding kits are made of heavy padding that is shaped to the contour of the rollbar tubing and can be taped or glued in place. The SCCA padding kit also includes a large rectangle of special shock absorbent material that can be attached directly behind the driver's helmet.

STREET PADDING KIT ----------------------- $18.00                 SCCA PADDING KIT -------------------------- $35.00

===========================================================================================================

 SHIPPING & HANDLING ON PADDING KITS SHIPPED SEPARATELY:

                                 (IF ORDERED & SHIPPED WITH A ROLLBAR OR CAGE THERE IS NO EXTRA CHARGE)

SURFACE -------------------------- $12.00        AIR ----------------------------- $24.00            NEXT DAY AIR --------------------- $48.00  ===========================================================================================================